Basic Furniture List

Bed
Headboard
Night Tables
TV Cabinet
Chest of Drawers or combined with TV Cabinet (Armoire)

Desk or Table (with shallow drawer)
Desk Chair
Side Table (minimum 750mm x 750mm square; or 800mm diameter round; and 500mm high)
Ottoman Lounge Chairs (2 quantity; minimum 500mm wide x 750mm deep x 500mm high, seat height 450mm)
Television (500mm minimum)
Decorative Mirror (minimum 600mm wide x 920mm high)
2 x Telephones (located at headboard wall)
Alarm Clock (analog)
Artwork
Artefact
High quality Portable Luggage Rack
Valet Unit (in wardrobe)

Case Pieces

Construction Requirements
Heavy-duty first quality workmanship and materials.

All movable furniture to have glides or casters.

All drawers to have ball bearing extension glides and stops.

All edges to be hardwood not plastic laminate.

All working surfaces must have high pressure laminate tops or alcohol resistant finish to timber.

Quantity Overage
2% of all Guest Room furniture should be provided for reserve.

Upholstered Furniture

Construction Requirements
All frames to be hardwood, double-dowelled, corner blocked, screwed and glued so that joints have a tight fit. Corner blocks are especially important in the seat as they give support to the legs.

Webbing, springing and cushioning must be top contract quality.

All movable furniture to have glides (nylon glides preferred).

Casters are recommended for movable furniture.

Where specified, foam rubber for upholstery should be dense quality (firm); polyurethane filling is also acceptable.

All upholstered furniture filling must meet local fire codes or Sheraton Fire Safety Guidelines, whichever is more stringent.

Upholstery Fabric
Contract quality fabric upholstery will be used for all seating.

Fabrics should be selected with property locations in mind.

Tightly woven materials are recommended because of their durability and strength.

Loosely woven fabrics should have a good back coating (latex or similar) for durability.

Must be pre-shrunk (shrinkage factor to be less than 2%).

"Scotchguard" brand stain repeller treatment or equal is required for fabric upholstery.

All upholstery fabrics must be flame retarded.

2% extra yardage is to be supplied of all fabrics.

All samples submitted for approval must be accompanied by detailed specifications.